Huzhou Wenxian Hydrogen Cloud Energy Technology Co., Ltd

FMS Needle Felt

FMS is a good high temperature resistance filter fabrics, this fabrics mainly made by 5.5 micron diameter glass fiber blend with P84 (polyimide), aramid(Nomex), PPS (ryton) fiber, with the three dimensional cellular structure, low air resistance, especial blend with P84 which with leaf style fiber, can increase the filter surface (80%), so easy to collect the dust, increase the fiber cohesion, can accept the high wind speed (50% higher about 1~1.4m/min), and also with the properties of abrasion

Micro Polypropylene Needle Felt

Our factory selects 100D/160 and 500D/120 mixed Mioro-polypropylene fiber from Dupont Teijin fiber Co., Ltd, then composited with basalt fiber adopting advanced international standard and the equipments to produce micro PP needle punched filter felt. The past finished treatment includes singeing, calendaring, adding the basalt coating treatment.

Nomex Needle Felt

Aramid fiber needle felt is made of aramid fiber. It is a fiber with high temperature resistance, high strength, and high modulus, which can be used in various dust collectors within 200 ℃. Its strength is better than glass fiber, and its price is more advantageous, which is much lower than imported METAS fiber. At the same time, it can have all the advantages of imported fiber, and is deeply favored by users.

P84 Needle Felt

Product Description: The P84 high-temperature resistant needle punched filter mat produced by our factory is made of INSPEC FIBERS polyimide fiber produced by LENZING Company of Austria.

PTFE Needle Felt

Product Description: PTFE needle felt is a filter material made of PTFE (polytetrafluoroethylene fiber) through three-dimensional needle punching. PTFE fiber has a linear macromolecular structure, and PTFE needle felt has extremely strong temperature resistance, wear resistance, corrosion resistance, and chemical stability. It is widely used in various harsh flue gas filtration environments such as steel, electric power, and garbage incineration.

PPS Needle Filter Felt

Product Description: PPS fiber has high temperature resistance, complete retention of strength, and inherent chemical resistance. It can maintain good filtration performance in harsh environments and achieve an ideal service life. PPS fibers have poor oxidation resistance at high temperatures and cannot be used with high oxygen content. PPS filter felt is an ideal high-temperature filter material, with a lower price than high-temperature filter material METAS, and is an ideal substitute for META

PP Needle Felt

Product Description:Micro Polypropylene Needle Felt is widely used in the liquid filtration industry, based on the excellent acid resistance, alkali resistance, and hydrolysis stability of polypropylene fibers. It is the best choice in medicine, chemical industry, etc. The disadvantage lies in the low softening point and photosensitivity of polypropylene fiber, so we can only use it conditionally under conditions where temperature requirements are not high and the working environment is relative

Acrylic Needle Felt

Acrylic needle punched felt is a fine fiber cloth that uses a nonwoven process to interlace acrylic reinforced fibers with evenly distributed voids. The surface is treated by hot rolling, singeing, and other processes to make its surface smooth and not easy to be blocked by dust. Acrylic needle punched felt has a temperature resistance of 140 to 160 degrees Celsius. It is a medium temperature filter material with good acid resistance, alkali resistance, and hydrolysis resistance.

Room 408, Ganglong Entrepreneurship Building, Huzhou Economic and Technological Development Zone, Huzhou City, Zhejiang Province

Tel: +86-572-2022769 Mobile:+86-13757290964 (Manager Yuan) Mobile:+86-15067208151 (Manager Yin)

Fax: +86-572-2037569 Email: 13757290964@139.com(Manager Yuan) mindyyin@traniacell.com.cn (Manager Yin)

top